Quantum Scalar i80 - Figure 14 LDAP Setup Example

Chapter 4: Configuring the Library
Working With LDAP User Accounts (Remote Authentication)
Quantum Scalar i40 and Scalar i80 User’s Guide 93
Figure 14 LDAP Setup Example
4 Click Apply to apply any changes.
If you enabled LDAP or modified LDAP
settings, the Test Settings
button is activated.
5 Click th
e Test Settings button to test all the new or changed LDAP
settings. See
Testing LDAP Settings on page 94 for more
information.
6 Save
the library configuration (see Saving the Library Configuration
on page 107).