Chapter 4: Configuring the Library
Working With E-mail Notifications
Quantum Scalar i40 and Scalar i80 User’s Guide 75
Web Client
1 Select Setup > Notification > Setup.
The Setup - System E-mail Notifications screen displays. The
screen lists all the e-mail notifications that have been created.
2 Select an address to modify, and click Modify.
The Modify System E-mail Notification screen displays.
3 Modify any of the following settings:
•Under the New Settings column, select the Enabled check box
to enable e-mail notification. Clear the Enabled check box to
disable e-mail notification.
• Under the New Settings column, select a new filter level from
the Filter Level drop-down list. For more information on filter
levels, see
Working With E-mail Notifications on page 72.
•In the E-mail Address text box, type a new e-mail address.
•In the E-mail Comment text box, type a new comment.
Note: Only letters, numbers, spaces, and hyphens are allowed in
this fields. Do not use any special characters—like commas,
apostrophes to name a few.
4 Click Apply.
5 Save the library configuration (see Saving the Library Configuration
on page 107).
Deleting E-mail
Notifications
Administrators can delete an e-mail notification when it is no longer
needed.
Note: The default techsup@quantum.com e-mail notification
cannot be deleted, but the notification can be enabled or
disabled. It is disabled by default.
You can delete e-mail notifications on the Web client only.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
