Chapter 11: Troubleshooting
Resetting Factory Defaults
Quantum Scalar i40 and Scalar i80 User’s Guide 333
Resetting Factory Defaults
Resetting factory defaults restores the library’s default configuration
(see
Default Configuration on page 40).
Resetting factory defaults clears:
• Most of the library’s configurable items, such as partitions, user
accounts, import/export (I/E) station slots, cleaning slots.
• All diagnostic tickets and log information.
• Any tape drive firmware images uploaded manually.
Resetting factory defaults does NOT clear:
Date and time, network configuration, or license key settings, nor does
it change the library firmware version.
You may want to reset factory defaults if you are completely reinstalling
or reconfiguring the library.
If you downgrade your library’s firmware version to an earlier released
version, library configuration settings will be reset to the factory
defaults for the newly installed firmware.
If you upgrade firmware, your library configuration settings remain as
you have set them.
Web Client
On the Web client, this feature is only available to service users using the
service login and password.
Operator Panel
On the operator panel, if logins are disabled (default), this operation is
available to all users. If logins are enabled, this operation is only
available to service users using the service login and password.
1 Select Tools > Reset Factory Defaults.
A message displays stating that configuration data will be cleared
and library rebooted.
2 Press Yes to continue.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
