Chapter 4: Configuring the Library
Working With Partitions
Quantum Scalar i40 and Scalar i80 User’s Guide 59
Operator Panel
1 Select Reports > Partitions (alternatively, select Setup >
Configure Partitions > View Current Partitions).
2 If more than one partition is configured on the library, select a
partition and press Select.
Web Client
You can view partition information in several places:
• Library home page (see Web Client Home Page on page 31)
• Library configuration report (see Viewing the Library Configuration
Report on page 210).
• Partition modification screen (select Setup > Configure Partitions,
select a partition, and click Modify).
Changing Access to
Partitions
An administrator can control which partitions a specified user can
access by modifying the user’s account on the Web client. For more
information, see
Working With Local User Accounts and Passwords on
page 79.
Web Client
Select Setup > User Management > User Accounts.
Taking a Partition
Online or Offline
There are two partition modes: online and offline.
• Online — SCSI hosts control the partition. In this mode, all host
application SCSI commands are processed.
• Offline — SCSI hosts cannot control the partition. In this mode,
library operations can be performed via the local or remote user
interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
