Quantum Scalar i80 User Manual

Quantum Scalar i40 and Scalar i80 User’s Guide 225
Chapter 9
Installing, Removing, and
Replacing Components
This chapter describes how to add, remove, and replace hardware
components within your library.
WARNING: Two people are required to lift and install the library.
WARNING: Under no circumstances should a rack be moved while a
library is installed.
This chapter covers:
• Taking ESD Precautions
• Connecting Library Cables
• Installing the Rack Mount Kit (Rail Kit)
• Installing the Library In a Rack
• Removing the Library From a Rack
• Installing the Library in a Desktop Kit
• Removing the Library from a Desktop Kit
• Removing and Replacing the Front Bezel
• Replacing the Chassis
• Removing and Installing a Filler Plate

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g