Chapter 9: Installing, Removing, and Replacing Components
Packaging the Library for Moving or Shipping
292 Quantum Scalar i40 and Scalar i80 User’s Guide
Packaging the Library for Moving or Shipping
Packaging Kit Contents • Shipping carton
•Top foam
• Bottom foam
•Anti-static wrapping
• (4) M5 Thumbscrews to restrain Y-tray
• Bottom tray (Scalar i80 only)
• Pallet (Scalar i80 only)
• (2) Cardboard “corner boards” (Scalar i80 only)
• (2) Straps and buckles for securing packaging to pallet (Scalar i80
on
ly)
Creating a Backup Map
of Cartridge Locations
You must remove all the tape cartridges before shipping the library. If
you want to maintain the same partitions and magazine slot
assignments in your new location as you are using currently, you will
want to reinstall your tape cartridges in the same slots they are in now.
The library configuration report provides a convenient “map” of your
slot assignments. If you print or copy this map, you will be able to easily
install your cartridges later.
1 On
the Web client, select Reports > Library Configuration.
2 Click th
e Show Barcodes button.
The screen displays a map of the li
brary showing the partitions and
the location of each cartridge, by barcode.
3 Click th
e “print” icon in the upper right corner to print the report.
Alternatively, take a screen capture of the report and save or print it,
or copy the map by hand.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
