Quantum Superloader 3 - Shadow Event Log; Soft Logs; Update Logs

Appendix A Basic Information Logs
SuperLoader Logs
236 SuperLoader User’s Guide
Soft Logs 1 Soft logs record the SuperLoader’s history during different conditions.
They are similar to hard logs but may have been overwritten by a
recovery action.
Update Logs 1 Update Logs record firmware changes and upgrades in the SuperLoader.
An update log also records when hardware is updated or changed.
Shadow Event Log1
Shadow logs record the picker EEPROM used only at Quantum
Engineering. Shadow logs appear differently than the other logs (see
figure 121
).
Code
Description
D2-D4 Position Sensor Bad
D5-DE Cartridge flags located on the magazine may be bad or the sensor to detect
the flags may have a problem
DF Jammed Cartridge
Software
Location ID
Defines a location in the firmware internal to the task being performed.
This ID is used by firmware engineering to identify what part of the actual
firmware task detected the event.
Note: There are no important fields in the Shadow Event log. This
log is used only at Quantum Engineering.
Field Description