Quantum Superloader 3 - Tape Drive Logs; Common Information; Log Display; Log Fields

Appendix A Basic Information Logs
Tape Drive Logs
238 SuperLoader User’s Guide
Tape Drive Logs 1
The tape drive generates six types of logs. SCSI Check Condition Error
logs, Bugcheck Error logs, and Event Error Logs are described in
chapter 5
on page 129. This section describes the other tape drive logs.
Common
Information
1
Tape drive logs have the following information in common.
Log Display 1 Partial information about tape drive logs can be retrieved from SCSI and
On-board Remote Management (see figure 122
).
Figure 122 Example
Tape Drive Log
Log Fields 1 All tape drive logs contain three main fields. Table 39 describes each of
these fields.
Event number or name
POH/PC
Event log number
Event Log # 2 - Event: A401 [V80-0 4-AUG-1998] 000:03:52.153 POH/PC = 340 / 16
110013B9 571E0101 00400000 00130000 02D10000 00440000 00000000 220024CA
00000000 04720000 00000000 00000000 00000000 00000000 00000000 00000000
00000000