Chapter 4 SuperLoader Operation
Front Panel Functionality
76 SuperLoader User’s Guide
To Enter a Password: 4
Security must be turned on before you can enter a password (see Set
Security Options on page 118).
1 On the main menu, scroll to
Commands, then press Enter.
2 On the Commands submenu, scroll to
Enter Password, then press
Enter.
3 On the Enter Password submenu, scroll to:
•
Operator to enter an operator-level password.
•
Administrator to enter an administrator-level password.
4 Press
Enter. The Login screen appears with a row of asterisks. A
textbox appears above the first asterisk.
5 In the textbox, scroll to the first number of the password. The cursor
automatically appears at the first character of the password. The
following is an example screen for an Administrator.
Figure 55 Log In
Sample
6 At each position of the password, use the up and down arrow to
change the value of each number. Press
Enter to advance your cursor
to the next digit.
7 Press
Enter. The textbox above the asterisk disappears and another
textbox appears above the next asterisk.
8 Repeat steps 6
and 7 to enter the remaining digits of your password.
When you have finished entering your password, the LCD displays
Submit Password below the asterisks.
Note: If you make a mistake, press
Escape to backspace to the
digit you want to change.
Login as
Administrator
0
******
To Next Page
Loading...
Need help?
General
