Appendix A Basic Information Logs
Tape Drive Logs
SuperLoader User’s Guide 241
Figure 124 DLT Drive
Diagnostics Event Log
Table 41 describes the DLT Diagnostic Results Event Log fields.
Table 41 DLT Drive
Diagnostics Field
Descriptions
DLT Firmware
Changes
1
Each time the DLT tape drive is requested to change the firmware
version, either by tape or SCSI, three possible entries may be logged.
Field Description
Test Information about the test run and the results.
Event Log # 5 - Diag ILOG: POH/PC = 6/3
Test: IWR-RD Time: 6:07, Sts-Miscompare
DLT8000 ENt. Wr/Rd: 299545/169
Compare ON ErrRate Wr: 1.4145 / MB, Rd: 357. 14/ Gb
pHWE: 0 pHRE: 0
4 - Chan. Wr Metrics
Wr - CRC: 69091, 21 22 9 36 / 1 6 1 4
Wr - DO: 297, 9 13 12 10 / 12 17 14 12
4 - Chan. Rd Metrics
Rd - CRC: 394, 24 15 6 34 / 4 9 1 6
Rd - DO: 22, 27 23 14 23 / 5 5 0 5
Rd-MissingBlks: 10, ReRds: 0
Temp 46 C
To Next Page
Loading...
Need help?
General