Chapter 4 SuperLoader Operation
View Status Information
SuperLoader User’s Guide 93
To View an Element’s Status: 4
1 On the main menu, scroll to
Status, then press Enter.
2 On the Status submenu, scroll to
Autoloader, then press Enter.
3 On the SuperLoader submenu, scroll to
Element Status, then press
Enter. The following appears:
Figure 66 Element
Status
4 Press Enter. A map of all the magazine slots appears. Slots that are
occupied by a data cartridge are indicated by an asterisk (
*). The
empty slot that is assigned to a cleaning tape is indicated with an
exclamation point (
!). The slot that is occupied by a cleaning tape is
indicated with an ampersand (
@).
Figure 67 Magazine
Slot Map
.
5 Scroll to the slot containing the cartridge for which you want to see
the label, or the cartridge you want to move, then press
Enter.
The Element Status screen appears, displaying the bar code label for
that cartridge. A move command also appears on the screen.
*Drive: QWC159
*Mailslot: QWC189
Picker:
Enter to View
Magazines
Slot 1 Slot 2* Slot 3* Slot 4*
Slot 5 Slot 6 Slot 7* Slot 8*
Slot 9 Slot 10 Slot 11* Slot 12*
Slot 13* Slot 14 Slot 15 Slot 16!
To Next Page
Loading...
Need help?
General
