Chapter 5 Troubleshooting
A407: Directory Read
SuperLoader User’s Guide 193
Table 28 Directory
Read Field
Descriptions
Field Description
Called Mode What function was being performed when the event was logged.
1= Read of the Directory when Loading the tape.
2= Write of the Directory while Unloading the tape.
3= Write of Directory from BOT. This is the step in which the drive
erases the directory when loading the media. This occurs after the
directory was read during the tape load process.
Media Format Format/Density the media is written.
4 = DLT 260
8 = DLT600
10 = DLT2000/2000XT
20 = DLT4000
40 = DLT7000
80 = DLT8000
300 = SDLT220
310 = SDLT320
300 = SDLT220
320 = SDLT600
blank media is reported as unknown
Flags: Information DLT drive uses to determine further action if any take in rebuilding this
information and a possible reason why the directory event was logged
Bit
Description
0 Read on Load Complete
1 Inhibit Directory Write
2 LBN 0 Found
To Next Page
Loading...
Need help?
General