Quantum Superloader 3 - Figure 35 Main Menu (LCD); Figure 36 Setting a Time Zone (Hours)

Chapter 2 Installation and Configuration
Setting the Time
SuperLoader User’s Guide 43
To Set the Time Zone: 2
1 On the main menu, scroll to
Configuration, then press Enter.
Figure 35 Main Menu
(LCD)
2 On the Configuration menu, scroll to Time, then press Enter.
3 On the Time submenu, scroll to
Set Timezone, then press Enter. The
Time Zone screen appears, allowing you to set the hours. The cursor
automatically appears at the first digit.
Figure 36 Setting a
Time Zone (Hours)
4 Scroll to set the number of hours’ difference between your local time
and GMT. If you do not know the difference between your local time
and GMT, refer to appendix C
on page 251.
Status
Commands
Configuration
Diagnostics

Time Zone: set hrs
GMT -6:00