Quantum DXi V1000 - Page 151

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 143
E1016403 GetShare: Option "get" has invalid value
E1016404 GetShare: Failed to read/get option "get".
E1016405 GetShare: Failed to write/set option "get".
E1016411 GetShare: Option "name" is missing.
E1016412 GetShare: Option "name" requires a value
E1016413 GetShare: Option "name" has invalid value
E1016414 GetShare: Value of option "name" is too long
E1016415 GetShare: Failed to read/get option "name".
E1016416 GetShare: Failed to write/set option "name".
E1016431 GetShare failed!
E1016461 GetShare failed to open file!
E1016801 GetcountShare: Option "getcount" is missing.
E1016802 GetcountShare: Option "getcount" requires a value
E1016803 GetcountShare: Option "getcount" has invalid value
E1016804 GetcountShare: Failed to read/get option "getcount".
E1016805 GetcountShare: Failed to write/set option "getcount".
E1016811 GetcountShare: Option "proto" requires a value
E1016812 GetcountShare: Option "proto" has invalid value
E1016813 GetcountShare: Failed to read/get option "proto".
E1016814 GetcountShare: Failed to write/set option "proto".
E1016821 GetcountShare: Option "namematch" requires a value
E1016822 GetcountShare: Option "namematch" has invalid value
E1016823 GetcountShare: Failed to read/get option "namematch".
E1016824 GetcountShare: Failed to write/set option "namematch".
E1016831 GetcountShare failed!
E1016861 GetcountShare failed to open file!
E1017201 AddSharesetting: Option "add" is missing.
E1017202 AddSharesetting: Option "add" requires a value
E1017203 AddSharesetting: Option "add" has invalid value
E1017204 AddSharesetting: Failed to read/get option "add".
E1017205 AddSharesetting: Failed to write/set option "add".
Error Code Error Message