Quantum DXi V1000 - Page 157

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 149
E2000462 AddVtl: Option "dedup" is required because another optional
option is specified!
E2000463 AddVtl: Failed to read/get option "dedup".
E2000464 AddVtl: Failed to write/set option "dedup".
E2000471 AddVtl: Option "startbackup" is missing.
E2000472 AddVtl: Option "startbackup" is required because another
optional option is specified!
E2000473 AddVtl: Option "startbackup" requires a value
E2000474 AddVtl: Option "startbackup" has invalid value
E2000475 AddVtl: Failed to read/get option "startbackup".
E2000476 AddVtl: Failed to write/set option "startbackup".
E2000481 AddVtl: Option "endbackup" is missing.
E2000482 AddVtl: Option "endbackup" is required because another
optional option is specified!
E2000483 AddVtl: Option "endbackup" requires a value
E2000484 AddVtl: Option "endbackup" has invalid value
E2000485 AddVtl: Failed to read/get option "endbackup".
E2000486 AddVtl: Failed to write/set option "endbackup".
E2000491 AddVtl: Failed to read/get option "nostart".
E2000492 AddVtl: Failed to write/set option "nostart".
E2000501 AddVtl failed!
E2000502 Specified VTL name already exists
E2000503 Error retrieving the VTL info list
E2000504 Error retrieving info for VTL
E2000505 Max VTLs defined, cannot add more VTL
E2000506 Max drives defined, cannot add more VTL
E2000507 Error retrieving supported Library type
E2000508 Error retrieving supported Drive type
E2000509 Dedup must be specified
E2000510 Both start and end backup window time must be specified
E2000511 Error creating VTL
E2000512 Unable to set dedup window
Error Code Error Message