Quantum DXi V1000 - Page 173

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 165
E2009242 AddSanclientgroup: Option "target" requires a value
E2009243 AddSanclientgroup: Option "target" has invalid value
E2009244 AddSanclientgroup: Failed to read/get option "target".
E2009245 AddSanclientgroup: Failed to write/set option "target".
E2009251 AddSanclientgroup: Option "device" is missing.
E2009252 AddSanclientgroup: Option "device" requires a value
E2009253 AddSanclientgroup: Option "lun" is missing.
E2009254 AddSanclientgroup: Option "lun" requires a value
E2009255 AddSanclientgroup: Option "device" has invalid value
E2009256 AddSanclientgroup: Failed to read/get option "device"
E2009257 AddSanclientgroup: Failed to write/set option "device".
E2009261 AddSanclientgroup: Option "lun" has invalid value
E2009262 AddSanclientgroup: Failed to read/get option "lun"
E2009263 AddSanclientgroup: Failed to write/set option "lun".
E2009281 AddSanclientgroup failed!
E2009282 AddSanclientgroup: VTL does not exists
E2009283 AddSanclientgroup: SAN client group already exists.
E2009284 AddSanclientgroup: No SAN client group found for VTL
Name and group name specified.
E2009285 AddSanclientgroup: No Target found for group to determine
node
E2009286 AddSanclientgroup: No Host found for group.
E2009287 AddSanclientgroup: Host and Target type mismatch.
E2009288 AddSanclientgroup: Invalid SAN client group type
E2009289 AddSanclientgroup: Failed to save SAN client group.
E2009290 AddSanclientgroup: Unable to add SAN client group.
E2009291 AddSanclientgroup: Failed getting the list of VTLs.
E2009292 AddSanclientgroup: Failed getting the list of VTDs.
E2009293 AddSanclientgroup: No VTDs exist in the specified VTL.
E2009294 AddSanclientgroup: Drive device does not exists in the list of
VTDs.
E2009295 AddSanclientgroup: Exception caught.
Error Code Error Message