Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
228 CLI Error Codes
E4008403 ListAccentstats: Option "list" has invalid value
E4008404 ListAccentstats: Failed to read/get option "list".
E4008405 ListAccentstats: Failed to write/set option "list".
E4008411 ListAccentstats: Failed to read/get option "all".
E4008412 ListAccentstats: Failed to write/set option "all".
E4008461 ListAccentstats failed!
E4008480 Failed to get Accent statistics because it is currently disabled.
E4008481 Failed to get Accent statistics because it is currently not
supported.
E5000001 Failed to get cluster status.
E5000002 Node not in cluster
E5000003 Node is still joining cluster (transient)!
E5000004 Node is still unjoining cluster (transient)!
E5000005 Cluster status is unknown!
E5000006 Cluster is in diagnostic state!
E5000007 Cluster is in degraded state!
E5000020 Shared filesystem /snfs is not available (not mounted)!
E5000021 Common area /Q is not available (not mounted)!
E5000022 Cannot get the node number!
E5000401 GetstatusNode: Option "getstatus" is missing.
E5000402 GetstatusNode: Option "getstatus" requires a value
E5000403 GetstatusNode: Option "getstatus" has invalid value
E5000404 GetstatusNode: Failed to read/get option "getstatus".
E5000405 GetstatusNode: Failed to write/set option "getstatus".
E5000411 GetstatusNode: Option "flag" is missing.
E5000412 GetstatusNode: Option "flag" requires a value
E5000413 GetstatusNode: Option "flag" has invalid value
E5000414 GetstatusNode: Failed to read/get option "flag".
E5000415 GetstatusNode: Failed to write/set option "flag".
E5000441 Failed to retrieve status of the node in the cluster!
E6000401 UpgradeFirmware: Option "upgrade" is missing.
E6000402 UpgradeFirmware: Option "upgrade" requires a value
Error Code Error Message
To Next Page