Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 257
E6553291 ChangeEvent: Failed to read/get option "monthly".
E6553292 ChangeEvent: Failed to write/set option "monthly".
E6553301 ChangeEvent: Option "monthday" requires a value
E6553302 ChangeEvent: Option "monthday" has invalid value
E6553303 ChangeEvent: Failed to read/get option "monthday".
E6553304 ChangeEvent: Failed to write/set option "monthday".
E6553311 ChangeEvent: Failed to read/get option "yearly".
E6553312 ChangeEvent: Failed to write/set option "yearly".
E6553321 ChangeEvent: Option "yearday" requires a value
E6553322 ChangeEvent: Option "yearday" has invalid value
E6553323 ChangeEvent: Failed to read/get option "yearday".
E6553324 ChangeEvent: Failed to write/set option "yearday".
E6553331 ChangeEvent: Option "interval" requires a value
E6553332 ChangeEvent: Option "interval" has invalid value
E6553333 ChangeEvent: Failed to read/get option "interval".
E6553334 ChangeEvent: Failed to write/set option "interval".
E6553341 ChangeEvent: Option "until" requires a value
E6553342 ChangeEvent: Option "until" has invalid value
E6553343 ChangeEvent: Failed to read/get option "until".
E6553344 ChangeEvent: Failed to write/set option "until".
E6553351 ChangeEvent: Option "count" requires a value
E6553352 ChangeEvent: Option "count" has invalid value
E6553353 ChangeEvent: Failed to read/get option "count".
E6553354 ChangeEvent: Failed to write/set option "count".
E6553355 ChangeEvent: Until date/time must be after start date/time.
E6553356 ChangeEvent: Until date/time must be after end date/time.
E6553361 ChangeEvent: Option "recurstr" requires a value
E6553362 ChangeEvent: Option "recurstr" has invalid value
E6553363 ChangeEvent: Failed to read/get option "recurstr".
E6553364 ChangeEvent: Failed to write/set option "recurstr".
E6553371 ChangeEvent: An optional option is required because
another optional option has been specified!
Error Code Error Message
To Next Page