Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
260 CLI Error Codes
E6591501 Event ID format is invalid
E6591502 Event ID contains invalid characters
E6591503 The first character of event ID is invalid.
E6591504 The last character of event ID is invalid.
E6591505 Attempt to change an event instance to a non-recurring is
not allowed.
E6591506 Attempt to change recurrence information on an event
instance is not allowed.
E6591507 The throttle bandwidth requires either an 'M' or a 'K' to be
specified with the value.
E6591999 Validation failed!
E6592001 Could not create the event, create event failed.
E6592002 Could not create the event, start action failed.
E6592003 Could not create the event, end action failed.
E6592004 Could not create the event, empty arguments passed.
E6592005 Could not create the event, set attributes failed.
E6592006 Could not create the event, update failed.
E6592007 Could not change the event, update failed.
E6592008 Could not read the event, get attributes failed.
E6592009 Could not open the event.
E6592010 Could not open the event instance.
E6592011 Failed to get event list.
E6592012 Failed to read event info from database!
E6592013 Could not delete the event.
E6592014 Could not change the event, set attributes failed.
E6592015 Could not change the event, set action attributes failed.
E6592100 Failed to read event ID
E6592101 Failed to read event instance ID
E6592102 Failed to read event name
E6592103 Failed to read event type
E6592104 Failed to read the action scheduled to run at start of event
E6592105 Failed to read event action start parameter
Error Code Error Message
To Next Page