Quantum DXi V1000 - Page 285

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 277
E8003611 DelSnmpcom: Option "name" is missing.
E8003612 DelSnmpcom: Option "name" requires a value
E8003613 DelSnmpcom: Option "name" has invalid value
E8003614 DelSnmpcom: Failed to read/get option "name".
E8003615 DelSnmpcom: Failed to write/set option "name".
E8003616 DelSnmpcom: Value of option "name" is too long
E8003617 DelSnmpcom: community name invalid
E8003618 DelSnmpcom: failed to retrieve the configured communities
E8003619 DelSnmpcom: no community exists with the given name
E8003620 DelSnmpcom: no communities have been configured
E8003631 DelSnmpcom failed!
E8004001 DeleteallSnmpcom: Option "deleteall" is missing.
E8004002 DeleteallSnmpcom: Option "deleteall" requires a value
E8004003 DeleteallSnmpcom: Option "deleteall" has invalid value
E8004004 DeleteallSnmpcom: Failed to read/get option "deleteall".
E8004005 DeleteallSnmpcom: Failed to write/set option "deleteall".
E8004021 DeleteallSnmpcom failed!
E8004401 TestSnmptrap: Option "test" is missing.
E8004402 TestSnmptrap: Option "test" requires a value
E8004403 TestSnmptrap: Option "test" has invalid value
E8004404 TestSnmptrap: Failed to read/get option "test".
E8004405 TestSnmptrap: Failed to write/set option "test".
E8004411 TestSnmptrap: Option "trapip" is missing.
E8004412 TestSnmptrap: Option "trapip" requires a value
E8004413 TestSnmptrap: Option "trapip" has invalid value
E8004414 TestSnmptrap: Failed to read/get option "trapip"
E8004415 TestSnmptrap: Failed to write/set option "trapip".
E8004421 TestSnmptrap failed!
E8004422 TestSnmptrap failed to validate trap destination address!
E8004423 Number of trap destinations cannot exceed 5
E8050011 Unable to get the list of ifcfg files.
Error Code Error Message