Quantum DXi V1000 - Page 294

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
286 CLI Error Codes
E8051731 SetnetworkUnsegmented: Option "dnstertiary" requires a
value
E8051732 SetnetworkUnsegmented: Option "dnstertiary" has invalid
value
E8051733 SetnetworkUnsegmented: Failed to read/get option
"dnstertiary".
E8051734 SetnetworkUnsegmented: Failed to write/set option
"dnstertiary".
E8051741 SetnetworkUnsegmented: Option "dnssearchpath" requires a
value
E8051742 SetnetworkUnsegmented: Option "dnssearchpath" has invalid
value
E8051743 SetnetworkUnsegmented: Failed to read/get option
"dnssearchpath".
E8051744 SetnetworkUnsegmented: Failed to write/set option
"dnssearchpath".
E8051751 SetnetworkUnsegmented: Option "vipnetmask" is required
because another optional option has been specified!
E8051752 SetnetworkUnsegmented: Option "vip" is required because
another optional option has been specified!
E8051761 SetnetworkUnsegmented failed!
E8051762 SetNetworkUnsegmented: Failed to open network
configuration file.
E8051763 SetNetworkUnsegmented: Failed to get network
segmentation config program seer variable.
E8051764 SetNetworkUnsegmented: Failed to get "Hostname" seer
context.
E8051765 SetNetworkUnsegmented: Failed to get "BondPolicy" from
network configuration file.
E8051766 SetNetworkUnsegmented: Failed to get "Bond0Algorithm"
from network configuration file.
E8051767 SetNetworkUnsegmented: Failed to get "Bond1Algorithm"
from network configuration file.
E8051768 SetNetworkUnsegmented: Failed to get "BondAlgorithm"
from network configuration file.
E8051769 SetNetworkUnsegmented: Failed to get "BondIPAddress" seer
context.
E8051770 SetNetworkUnsegmented: Failed to get "BondIPAddress"
from network configuration file.
Error Code Error Message