Quantum DXi V1000 - Page 300

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
292 CLI Error Codes
E8052214 SetnetworkSegmented: Failed to write/set option
"dnstertiary".
E8052221 SetnetworkSegmented: Option "dnssearchpath" requires a
value
E8052222 SetnetworkSegmented: Option "dnssearchpath" has invalid
value
E8052223 SetnetworkSegmented: Failed to read/get option
"dnssearchpath".
E8052224 SetnetworkSegmented: Failed to write/set option
"dnssearchpath".
E8052231 SetnetworkSegmented: Option "node" requires a value
E8052232 SetnetworkSegmented: Option "node" has invalid value
E8052233 SetnetworkSegmented: Failed to read/get option "node".
E8052234 SetnetworkSegmented: Failed to write/set option "node".
E8052251 SetnetworkSegmented failed!
E8052252 SetNetworkSegmented: Failed to open network
configuration file.
E8052253 SetNetworkSegmented: Failed to get network segmentation
configuration program seer variable.
E8052254 SetNetworkSegmented: Failed to get "Hostname" seer
context.
E8052255 SetNetworkSegmented: Failed to get segment type from
network configuration file.
E8052256 SetNetworkSegmented: Failed to get specified segment type
option from configuration file.
E8052257 SetNetworkSegmented: Failed to get segment type options
from configuration file.
E8052258 SetNetworkSegmented: Failed to get segment type options.
Caught "SeerHasNoAnswer" exception!
E8052259 SetNetworkSegmented: Failed to get bond policy from
network configuration file.
E8052260 SetNetworkSegmented: Failed to get bond0 algorithm from
network configuration file.
E8052261 SetNetworkSegmented: Failed to get bond1 algorithm from
network configuration file.
E8052262 SetNetworkSegmented: Failed to get bond algorithm from
network configuration file.
Error Code Error Message