Quantum DXi V1000 - Page 324

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
316 CLI Error Codes
E11001614 GetstatusVtllogical: Failed to write/set option "VTL".
E11001631 GetstatusVtllogical failed!
E11001632 GetstatusVtllogical: The specified VTL does not exist!
E11001633 GetstatusVtllogical: Buffer area is uninitialized.
E11001634 GetstatusVtllogical: Failed to retrieve VTL summary!
E11001635 GetstatusVtllogical: Failedto retrieve VTL information.
E11002001 GetstatusCommoncomponent: Option "getstatus" is missing.
E11002002 GetstatusCommoncomponent: Option "getstatus" requires a
value
E11002003 GetstatusCommoncomponent: Option "getstatus" has invalid
value
E11002004 GetstatusCommoncomponent: Failed to read/get option
"getstatus".
E11002005 GetstatusCommoncomponent: Failed to write/set option
"getstatus".
E11002011 GetstatusCommoncomponent: Option "storagearray" is
required because another optional option is specified!
E11002012 GetstatusCommoncomponent: Failed to read/get option
"storagearray".
E11002013 GetstatusCommoncomponent: Failed to write/set option
"storagearray".
E11002021 GetstatusCommoncomponent: Option "fcswitch" is required
because another optional option is specified!
E11002022 GetstatusCommoncomponent: Failed to read/get option
"fcswitch".
E11002023 GetstatusCommoncomponent: Failed to write/set option
"fcswitch".
E11002031 GetstatusCommoncomponent: Option "ethernetswitch" is
required because another optional option is specified!
E11002032 GetstatusCommoncomponent: Failed to read/get option
"ethernetswitch".
E11002033 GetstatusCommoncomponent: Failed to write/set option
"ethernetswitch".
E11002051 GetstatusCommoncomponent failed!
E11002052 GetstatusCommoncomponent: Failed to read seer file!
E11002053 GetstatusCommoncomponent: File used to read status is not
found.
Error Code Error Message