Quantum DXi V1000 - Page 339

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
CLI Error Codes 331
E13001621 ListHealthcheckstatus failed!
E13002001 EditHealthcheck: Option "edit" is missing.
E13002002 EditHealthcheck: Option "edit" requires a value
E13002003 EditHealthcheck: Option "edit" has invalid value
E13002004 EditHealthcheck: Failed to read/get option "edit".
E13002005 EditHealthcheck: Failed to write/set option "edit".
E13002011 EditHealthcheck: Option "name" is missing.
E13002012 EditHealthcheck: Option "name" requires a value
E13002013 EditHealthcheck: Option "name" has invalid value
E13002014 EditHealthcheck: Failed to read/get option "name".
E13002015 EditHealthcheck: Failed to write/set option "name".
E13002021 EditHealthcheck: Option "enable" is missing.
E13002022 EditHealthcheck: Failed to read/get option "enable".
E13002023 EditHealthcheck: Failed to write/set option "enable".
E13002031 EditHealthcheck: Option "disable" is missing.
E13002032 EditHealthcheck: Failed to read/get option "disable".
E13002033 EditHealthcheck: Failed to write/set option "disable".
E13002051 EditHealthcheck failed!
E13002052 EditHealthcheck: The healthcheck with the specified name
does not exist.
E13002053 EditHealthcheck: Failed to enable healthcheck on the
specified name.
E13002054 EditHealthcheck: Failed to disable healthcheck on the
specified name.
E13002401 GetstatusHealthcheck: Option "getstatus" is missing.
E13002402 GetstatusHealthcheck: Option "getstatus" requires a value
E13002403 GetstatusHealthcheck: Option "getstatus" has invalid value
E13002404 GetstatusHealthcheck: Failed to read/get option "getstatus".
E13002405 GetstatusHealthcheck: Failed to write/set option "getstatus".
E13002421 GetstatusHealthcheck failed!
E13002801 GetschedHealthcheck: Option "getsched" is missing.
E13002802 GetschedHealthcheck: Option "getsched" requires a value
Error Code Error Message