Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
48 Replication CLI Commands
Listing the Replicated
NAS Recovery Jobs on
Tar g e t
syscli --list nasrecjob
This CLI command allows the user to list the replicated NAS recovery jobs on the
target. The information listed includes the old and the new NAS share name,
source host name or IP address and recovery job details. The recover job details
contains when the job started, finished and its status.
Deleting the Replicated
VTL Recovery Jobs on
the Target
syscli --del vtlrecjob -repname <VTL_name> --srchost <source_hostname>
--id <ID_of_the_recovery_job>
This CLI command allows the CLI admin to delete a replicated VTL recovery job.
The replicated VTL name, source host name and the ID can be retrieved from the
list VTL Recovery jobs.
Deleting the Replicated
NAS Recovery Jobs on
Tar g e t
syscli --del nasrecjob --repname <NAS_share_name> --srchost
<source_hostname> --id <ID_of_the_recovery_job>
This CLI command allows the admin user to delete a replicated NAS recovery
job. The replicated NAS share name, source host name and the ID can be
retrieved from the list NAS Recovery jobs.
Listing the Replicated
VTL Failback Jobs on
the Target
syscli --list vtlfailbackjob
This CLI command allows the user to list the replicated VTL failback jobs on the
target. The information listed includes the VTL name, source host name or IP
address and failback job details. The failback job details contains when the job
started, finished and its status.
Output data:
ListofallreplicatedVTLfailbackjobs:
Totalcount=1
[failbackjob=1]
ID=1
VTLName=part4
TargetHost=10.40.164.70
FailbackJobStarted=WedJun316:45:532009
FailbackJobFinished=WedJun316:46:012009
FailbackJobStatus=Success
Listing the Replicated
NAS Failback Jobs on
the Target
syscli --list nasfailbackjob
This CLI command allows the user to list the replicated NAS share failback jobs
on the target.
To Next Page
Loading...
Need help?
General