Quantum DXi V1000 - Setting Host and Domain Names and the DNS Search Path; Editing the Network Configuration

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
Utility CLI Commands 71
Name=system
Access=ReadWrite
[WSDLSupport=1]
Name=WSDLSpecs
Version=2.0
[WSDLSupport=2]
Name=Common.xsd
Version=1.0‐2010/11/13
[WSDLSupport=3]
Name=Dxi.wsdl
Version=1.0‐2010/05/18
[WSDLSupport=4]
Name=Nas.wsdl
Version=1.0‐2010/05/18

[WSDLSupport=5]
Name=Nas.xsd
Version=1.0‐2010/11/05
[WSDLSupport=6]
Name=Replication.wsdl
Version=1.0‐2010/07/17
[WSDLSupport=7]
Name=Replication.xsd
Version=1.0‐2010/07/17
[WSDLSupport=8]
Name=System.wsdl
Version=1.0‐2010/09/09
[WSDLSupport=9]
Name=System.xsd
Version=1.0‐2010/09/09
Commandcompletedsuccessfully.
Example 2:
bash‐3.2$syscli‐‐authenticate‐‐namecliadmin‐‐password
****‐‐clienttesting
4eaa94a8c39b707524e9b157eab0eaee