Quantum LTO-9 HH SAS User Manual

Quantum LTO-9 HH SAS User’s Guide 23
Chapter 3
Installation
This is a customer setup unit. It is the customer's responsibility to install
this product.
Avoiding Drive Damage
on page 24
Unpack the Drive on page 24
Verify the Shipment
on page 25
Inspect the Power Cord and Outlet
on page 25
Position the Tape Drive on page 26
Install the SAS Host Adapter Card (if required)
on page 26
Connect the SAS Interface Cable on page 26
Connect Power
on page 28
Run Drive Diagnostics on page 29
Install Device Drivers on page 29
Configure the Tape Drive to a Server/Host
on page 29
Updating firmware
on page 30

Quantum LTO-9 HH SAS Specifications

General

Brand	Quantum
Model	LTO-9 HH SAS
Category	Storage
Language	English