Quantum LTO-9 HH SAS User Manual

Chapter 3: Installation
Updating firmware
Quantum LTO-9 HH SAS User’s Guide 31
The SCD presents a series of random characters during the firmware
download and update. The SCD briefly displays 8, then becomes blank
(not lit) when the firmware download and update is complete and there
are no errors. An error code will be displayed if a firmware download or
update error has been detected. The Ready light and the Fault light flash
briefly during the firmware download and update. The Ready light turns
On after the firmware download and update are complete.

Quantum LTO-9 HH SAS Specifications

General

Brand	Quantum
Model	LTO-9 HH SAS
Category	Storage
Language	English