Quantum LTO-9 HH SAS User Manual

Chapter 4: Operations
Diagnostic and Maintenance Functions
46 Quantum LTO-9 HH SAS User’s Guide
5 Copy Drive Dump: Copies data from a
drive dump (captured by using
Function Code 4) to the beginning of a
customer-supplied scratch (blank) data
cartridge, copies a drive dump to flash
memory, or erases a dump from flash
memory.
Function Code 5: Copy Drive Dump on
page 52
6 Run Host Interface Wrap Test:
Performs a check of the circuitry from
and to the connector.
Function Code 6: Run Host Interface
Wrap Test on page 53
7 Run RS-422 Wrap Test: This test causes
the drive to perform a check of the
circuitry and connector for the RS-422
interface.
Function Code 7: R
un RS-422 Wrap
Test on page 55
8 Unmake FUP Tape: Erases the FUP data
on a customer-supplied scratch (blank)
data cartridge and rewrite the cartridge
memory on the tape. This turns the
cartridge into a valid customer-
supplied scratch data cartridge.
Function Code 8: Unmake FUP Tape
on
page 55
9 Display Error Code Log: Displays the
last 10 error codes, one at a time (the
codes are ordered; the most recent is
presented first and the oldest (tenth) is
presented last).
Function Code 9: Display Error Code
Log on page 56
A Clear Error Code Log: Erases the
contents of the error code log.
Function Code A: Clear Error Code Log
on page 57
C Insert Cartridge into Tape Drive: This
function cannot be selected by itself,
but is a part of other maintenance
functions (such as Run Tape Drive
Diagnostics and Create FUP Tape) that
require a tape cartridge to be loaded.
Function Code C: Insert Cartridge into
Tape Drive on page 57
E Test Cartridge & Media: Performs tests
to ensure that a suspect cartridge and
its magnetic tape are acceptable.
Function Code E: Test Cartridge &
Media on page 57
Function Code Diagnostic or Maintenance Function Instructions Location

Quantum LTO-9 HH SAS Specifications

General

Brand	Quantum
Model	LTO-9 HH SAS
Category	Storage
Language	English