Quasimidi Technox

To Next Page

To Previous Page

8.) Editing the effects

Next are the effects of processor FX2. You will find them in the “EDIT FX2”-menu.

Chorus produces a short modulated delay. The sound becomes warmer and therefore it is superb for pad-sounds and

brilliant percussive sounds. For better results, mute the original signal from the main output by setting the pan-position of

the part to "pan:---".

|1>

Edit\FX2\Typ

|1>\01:Chorus1

The algorithms 1-3 offer the chorus-effects of FX2.

<2>

Edit\FX2\Paramtr

<2>\InputLev:\80

This parameter defines the input level. Take care that at least one part has the

effect-send open. Otherwise you will hear no effect-signal.

<3>

Edit\FX2\Paramtr

<3>\Depth:\\\100

This parameter controls the intensity of the chorus effect

<4>

Edit\FX2\Paramtr

<4>\Rate:\\\\\\8

This parameter controls the speed of the chorus effect.

<5>

Edit\FX2\Paramtr

<5>\Center:\\\16

Sets the average delay time.

<7|

Edit\FX2\Paramtr

<7|\OutputLv:\64

This parameter controls the output-level of the chorus effect.

Flanger-effects produce a similar modulation. In addition, a feedback gives more possibilities and extreme sounds. Like

the chorus effect it is mostly useful to avoid the original signal in the sum. (Pan:---)

|1>

Edit\FX2\Typ

|1>\04:Flanger1

The algorithms 4-5 offer the flanger-effects of FX2.

<2>

Edit\FX2\Paramtr

<2>\InputLev:\80

This parameter defines the input level. Take care that at least one part has the

effect-send open. Otherwise you will hear no effect-signal.

<3>

Edit\FX2\Paramtr

<3>\Depth:\\\100

This parameter controls the intensity of the flanger effect.

<4>

Edit\FX2\Paramtr

<4>\Rate:\\\\\\8

This parameter controls the speed of the flanger effect.

<5>

Edit\FX2\Paramtr

<5>\Center:\\\16

Sets the average delay time.

<6>

Edit\FX2\Paramtr

<6>\Feedback:\90

The amount of signal, which is fed back from FX2 output to the FX2 input. At

high amounts the typical Jet-flanger sounds occur.

<7|

Edit\FX2\Paramtr

<7|\OutputLv:\64

This parameter controls the output-level of the flanger effect.

Flanger-Effekte

Chorus-Effekte

Phaser-Effekte

Phaser effects produce level changes for different frequencies at once by phase shifting. The amount of phase shift can be

modulated, so a moving multi notch filter is generated. When setting the rate to zero, the phase shift can be adjusted

manually with “Centr.”-parameter.

|1>

Edit\FX2\Typ

|1>\06:Phaser1

The algorithms 6-7 offer the phaser-effects of FX2.

<2>

Edit\FX2\Paramtr

<2>\InputLev:\\90

This parameter defines the input level. Take care that at least one part has the

effect-send open. Otherwise you will hear no effect-signal.

<3>

Edit\FX2\Paramtr

<3>\Depth:\\\\127

This parameter controls the intensity of the phaser effect.

<4>

Edit\FX2\Paramtr

<4>\Rate:\\\\\\4

This parameter controls the speed of the phaser effect.

<5>

Edit\FX2\Paramtr

<5>\Center:\\\\34

When setting the rate to zero, the phase-shift can be adjusted manually with

"center".

<6>

Edit\FX2\Paramtr

<6|\OutputLev:\64

Adjust here the output-level.

QUASIMIDI STYLEDRIVE FANSEITE

http://people.freenet.de/styledrive/

Main Page

Quasimidi Technox - Page 15

Table of Contents

Related product manuals