When connecting the Dash Camera to a TV via HDMI Port, the device should be
kept on charge by using the included Micro USB charging cable.
TROUBLESHOOTING
HDMI CONNECTION
COMPUTER CONNECTION
5. Beep Sound: Mute control for key beeps. Select On / Off, Press REC Button to
confirm.
6. Language: Set the desired system language.
7. TV Mode: Select NTSC / PAL system.
8. Frequency: 50HZ / 60 HZ according to local power supply.
9. Flash: Turn On / Off flash light.
10. Format: Format the memory card to delete all photos and videos.
11. Default Setting: Return menu setting to defaults.
12. Version: To check the version of your device.
Use a micro USB cable which supports data transmission function (NOT included)
to connect with your computer (DO NOT compatible with Apple Mac). There are
Mass Storage and PC Camera for your choice.
Mass Storage:
1. Press REC Button, the Dash Camera now shows on your computer as a
removable disk drive.
2. Open the file explorer on your computer and you can view your videos and
photos stored in the file named DCIM.
PC Camera:
Press REC Button to use the device as a PC camera. Then open the new hard
drive found in your computer.
-9-
Problem Solution
Can’t take photo or record
Automatically stop when
recording
Appears files error when
replay photo and video
Cross stripe interference
in images
Because of TF card storage error, please use
formatting function to format your TF card.
Because of wrong light frequency, please set it to
50HZ or 60HZ according to the local power supply
frequency.
Check if the TF card has enough space or locked.
Use compatible high-speed TF card above class 6.
To Next Page
Loading...