Need help?Do you have a question about the QUBINO Flush Shutter and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Frequency | 868.42 MHz (EU), 908.42 MHz (US), 921.42 MHz (ANZ) |
| Compatibility | Z-Wave |
| Communication Protocol | Z-Wave |
| Radio Frequency | 868.42 MHz (EU), 908.42 MHz (US), 921.42 MHz (ANZ) |
Demonstrates how to install the Flush Shutter behind a wall switch for various applications.
Highlights extra functionalities that enhance the user experience and automation.
Details the key benefits and unique selling points of the Qubino Flush Shutter.
Summarizes the main features and advantages of the Qubino Flush Shutter.
Step-by-step guide for installing the Qubino Flush Shutter behind a wall switch.
Instructions for connecting and installing the optional Qubino temperature sensor.
Process for calibrating the shutter's upper and lower limits for accurate operation.
Calibration procedure for venetian blinds to set slat tilt position and angle.
How to operate the shutter using momentary switches.
How to operate the shutter using toggle switches.
Operating venetian blinds with momentary switches for movement and tilt.
Operating venetian blinds with toggle switches for movement and tilt.
Precision control and movement for venetian blind slats.
Selects switch type (momentary/toggle) for inputs I1 and I2.
Configures the device mode between standard shutter and venetian blinds.
Initiates the device's calibration process for shutter positioning.
To Next Page