17
Mod. 060
QUICK MILL
GB
5. INSTALLATION
5.1PACKAGING
After removing the original packaging, it advisable to save
it in case the grinder needs to be moved. The original
packaging serves only to protect the coffee grinder during
transport.
5.2 CONNECTION TO THE MAINS
Before connection the coffee grinder cord to a socket make
sure the main switch is on “0”.
Scrupulously follow the instructions in chapter 3 for
your safety and the safety of others.
5.3 FILLING THE HOPPER
Remove cover 1 and insert the coffee beans.
Do not start the coffee grinder without having filled
the hopper.
5.4 STARTING THE GRINDER
Before starting the grinder after a long period of no use,
clean it.
• Put the plug in to socket with earthing after having made
sure that the mains voltage is the same as the one indicated
on the operating data plate applied to the machine.
• Put the coffee grinder in a place away from sources of
heat or sprays of water and steam.
• Pour the coffee beans in the container and close it with
the cover.
5.5 COFFEE GRINDING
Turn on the main switch 5, position the filter holder at the
outlet 4, press button 6 with the filter holder until the
desired amount is round.
6. CLEANING, REPAIRING
OR MAINTENANCE WORK
Before carrying out cleaning, repairing or maintenance
work on the coffee grinder disconnect the plug from the
socket.
6.1 REPAIRING AND MAINTENANCE
Do not open the coffee grinder, in the event of faults which
involve repairs or maintenance, contact a QUICK MILL
authorised Technical Service Centre only. The manufacturer
To Next Page
Loading...
Need help?
General
