Quick BTR1808512 - Maintenance Procedures and Warnings

35
GB
RETRACTABLE THRUSTER BTR185 - IT GB - REV004B
WARNING: make sure that the power supply to the
electric motor is not switched on when maintenance
operations are carried out.
Quick
®
Thrusters are made in materials that are resistant to the
sea environment: In any case, it is indispensable to periodically
remove salt deposits that form on the outer surfaces to avoid
corrosions and consequent system inefficiency.
Dismantle once a year, following the points below:
• Keep the propellers (13 and 17) and the gearleg clean.
• Paint the propellers and the gearleg with anti-vegetative
paint before each season.
WARNING: do not paint the zinc anodes (15 and 19),
the sealings and the propellers shafts. Be careful not to
allow paint to penetrate in the “tracks” of the gearleg in
which the propeller hub moves.
• Check the zinc anodes (15 and 19) frequently.
• Replace the zinc anode before every season or when it is
more than half consumed.
• After every maintenance operation, ensure all screws are
securely fastened.
• After every maintenance, make sure that the propellers (13
and 17) is well tightened and that the bolts (1) locking the
electric motor (3) are tight.
• Make sure that all electrical connections are clean and firmly
fixed.
• Make sure that the batteries are in good condition.
MAINTENANCE
POS. DESCRIPTION CODE
1 Motor fixing screw
MBV1025MXCEO
2 Motor fixing washer
MBR10X000000
3A 3KW 12V Motor
EMFEL3012000
3B 3KW 24V Motor
EMFEL3024000
3C 4KW 12V Motor
EMFEL4012000
3D 4KW 24V Motor
EMFEL4024000
3E 6KW 12V Motor
EMFEL6012000
3F 6KW 24V Motor
EMFEL6024000
4A Reversing contactor
unit 150A 12V
ERBTQ1215000
4B Reversing contactor
unit
150A 24V
ERBTQ2415000
4C Reversing contactor
unit 350A 12V
ERBTQ1235000
4D Reversing contactor
unit
350A 24V
ERBTQ2435000
5A Reversing contactor unit
carter
PCCCBTQA0000
5B Reversing contactor unit
carter
PCCCBTQB0000
6 Reversing contactor
unit carter fixing
PBD04STPN000
7A 12V Linear actuator
EAL140M03012
7B 24V Linear actuator
EAL140M03024
8 Spring ring
MBA20MZ00000
9 Washer Ø8
MBR08X000000
10 Pin
MEP8275TP14X
11 Pin
MEP8385TP14X
12 Thruster drive pin
MBSC05025A00
13 Propeller RH
PVEL18500000
14 Propeller fixing nut
MBD12MXET000
15 Anode tip
MMANBTQ18500
16 Anode tip mounting screw MBV0625MXCE0
17 Propeller LH
PVEL185L0000
18 Screw M5*12 stainless steel
MBR0512MXCE0
19 Anode for BTR propeller
MANBTQR6015