Need help?Do you have a question about the Quick BTR185 and is the answer not in the manual?
General| Brand | Quick |
|---|---|
| Model | BTR185 |
| Category | Outboard Motor |
| Language | English |
Illustrations and detailed list of all available spare parts with their corresponding codes.
Details requirements for safe and efficient installation of the propulsion unit.
Guidelines for correct placement of the thruster on the hull for optimal performance.
Step-by-step guide for fitting the counter flange to the hull.
Instructions for preparing and installing the closing lid of the thruster.
Procedure for assembling the thruster to the counter flange on the hull.
Steps to verify the opening of the hatch and adjust the system.
Detailed procedure for calibrating limit switches and actuator settings.
How to adjust actuator limit switches (FC1, FC2) for proper operation.
Procedure for installing and tensioning limit switch wires with cable-stoppers.
Configuring dip-switch settings for various operational options.
Setting the maximum current/load allowed for the actuator using a rotary switch.
Initial steps to power on the system and verify thruster position.
How to command the thruster's descent using the TCD control.
How to command the thruster's ascent using the TCD control.
System automatically ascends thruster after a period of inactivity.
How the system detects and responds to errors sent from the TCD.
Periodic tasks for cleaning, inspection, and replacement of parts.
To Next Page
