To Next PageTo Next Page
Need help?Do you have a question about the Quick EBSN 20 and is the answer not in the manual?
Read manual, contact retailer if in doubt. Tampering voids guarantee.
EBSN unit and user's manual are included in the package.
Install EBSN vertically, fasten with screws, adjust sensor height for pump drainage.
Use non-conductive screws/washers/brackets when mounting on conductive metal walls.
Ensure correct connections, use appropriate fuse, ensure watertight joints.
Schematic diagram showing electrical connections for the EBSN and pump.
Pump switches on when water is present for >5s, off after 5s of no water.
Prevents switch-on if supply voltage is too low (e.g., <9V DC).
Manual switch-on/off via button (optional), auto-shutdown after 8 min.
LED signals indicate operating status: off, slow flashes, solid, rapid flashes.
Two quick flashes for battery save, three for prolonged pump operation.
Periodically clean the stainless steel sensors to ensure regular EBSN operation.
Details output, input, ambient, and general characteristics for EBSN models.
Details current carrying capacity of the relay contacts (Max) for EBSN 10, 15, 20.
Specifies supply voltage range and current absorbed when idling.
Includes operating temperature range and degree of protection (IP68).
Lists switch-on/off delays, casing material, dimensions, weight, and EMC class.
Provides a diagram with key physical dimensions of the EBSN unit in millimeters.
General
