To Next PageTo Next Page
Need help?Do you have a question about the Quick EBSN Series and is the answer not in the manual?
General| Series | Quick EBSN Series |
|---|---|
| Jumbo Frame Support | 9KB |
| MAC Address Table | 16K |
| Power Supply | 100-240V AC, 50/60Hz |
| Operating Temperature | 0°C to 45°C |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z |
This electronic switch permits the bilge pump to be switched on in the presence of water.
Detailed instructions for the physical installation and mounting of the EBSN unit.
Guidance on power supply connection, fuse installation, and watertight joints.
Visual representation of the EBSN's electrical connection types.
Describes automatic bilge pump activation based on water presence and switch-off logic.
Details how to manually switch the bilge pump on and off using a button.
Explains LED states and signals for operating status and warnings.
Guidance on periodic cleaning of sensors for optimal EBSN operation.
Key technical data including output, input, ambient, and general characteristics.
Detailed measurements of the EBSN unit, including width, height, and depth.
Information on identifying the product's code and serial number across languages.
Contact information for QUICK® Srl, including address, phone, fax, and email.
