Quick HRC 1002 - Maintenance and Technical Specifications; Maintenance Recommendations; Technical Data and Dimensions

19
GB
HRC - REV004A
MODEL
HRC 1002 HRC1004 HRC 1006 HRC 1008
HRC 1002 L HRC 1004 L HRC 1006 L HRC 1008 L
ELECTRICAL CHARACTERISTICS
Current capacity of contacts
(1)
Torch supply voltage
(2)
Torch power absorption
(2)
4A
6 ÷ 30 Vdc
100mA Max
4.2 m
EN 55022/B
GENERAL
Maximum cable extension
EMC class
62.2 x 185 x 49.4 mm
CASE
Dimensions (LxHxD)
-15 ÷ +70 °C
IP 67
AMBIENT CHARACTERISTICS
Operating temperature
Protection rating
(3)
(1)
On resistive load at 30 Vdc.
(2)
Only on models HRC 1002 L - HRC 1004 L - HRC 1006 L - HRC 1008 L.
(3)
With the plug correctly inserted into the socket. Excluding the area of the socket where the exit cable is fixed (IP 00).
TECHNICAL DATA
QUICK
®
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
MAINTENANCE
The control panel does not require any particular maintenance. To assure top performance, check the
cables and electrical connections once a year.
Clean the instrument with a soft rag dampened in water. Do not use chemicals or harsh products to clean
the chain counter.
MAINTENANCE - TECHNICAL DATA