EasyManua.ls Logo

Quick SBC 1450 NRG HR User Manual

Quick SBC 1450 NRG HR
40 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REV 001A
High
Quality
Nautical
Equipment
Manuale di installazione ed uso
CARICABATTERIE SBC NRG
Manual of installation and use SBC BATTERY CHARGER NRG
IT
GB
SBC NRG
HIGH POWER
SBC 1200 NRG FR
SBC 1450 NRG HR
SBC 1950 NRG HR
SBC 2450 NRG HR
Question and Answer IconNeed help?

Do you have a question about the Quick SBC 1450 NRG HR and is the answer not in the manual?

Quick SBC 1450 NRG HR Specifications

General IconGeneral
BrandQuick
ModelSBC 1450 NRG HR
CategoryBattery Charger
LanguageEnglish

Summary

Characteristics and Installation

SBC NRG Series Battery Charger Features

Lists advantages of the SBC NRG range of battery chargers.

Installation Requirements and Safety

General guidelines for installation and initial safety precautions.

Required Equipment for Installation

Specifies the necessary batteries and cables for charger installation.

Optimal Installation Site Selection

Guidance on placement for best operation and heat dissipation.

Power Supply and Connections

AC Power Supply and Connection

Requirements for connecting the battery charger to the AC power source.

DC Output Wiring

Procedure for connecting battery wires to the charger's output terminals.

Battery Connection Diagrams

Visual guides illustrating how to connect batteries to the charger.

Battery Safety Precautions

Warnings regarding polarity, gas generation, and safe battery handling.

Charging and Parallel Operation

Single Battery Charger Setup

Instructions for connecting a single charger to battery banks.

Parallel Charger Setup (Current Sharing)

Connecting multiple chargers for current sharing operation.

Control Signals and CAN Bus Interface

Information on control signals and the CAN bus interface for monitoring.

Charging Phases Explained (IUoU)

Detailed description of the Bulk, Absorption, and Float charging stages.

Network Communication and Status

Battery Charger Status Indicators

Explanation of simplified status signals on the CAN OUT port.

CAN Bus Network Configuration

Steps for setting up the CAN network connection for the charger.

Control Panel and User Interface

Control Panel Overview

Description of the LCD display and button functions for navigation.

System Status Message Examples

Examples and interpretation of operational status messages.

Programming the Battery Charger

Accessing Programming Menus

Instructions on how to enter and navigate the main and secondary menus.

Menu Structure and Navigation

A visual guide to the menu hierarchy and navigation options.

Configuration Settings

Battery Type Selection

Setting the battery chemistry for optimal charging performance.

CAN Group and Priority Setup

Configuring network grouping and priority levels for parallel chargers.

Monitor, Silent Mode, and Float Threshold

Adjusting monitoring, fan noise reduction, and float charge parameters.

Max Output Current and Language

Setting the maximum output current limit and menu language.

Error Handling and Notifications

Manual Reset Problems and Solutions

Lists error codes requiring manual reset and their solutions.

Automatic Reset Problems

Lists error codes with automatic reset and their causes.

Warning and Status Messages

Interpreting system warning and status messages for operation.

Maintenance and Technical Data

Recommended Maintenance Checks

Annual inspection advice for cables and electrical connections.

Technical Specifications Summary

Overview of output, input, protection, and ambient specifications.

Physical Dimensions

Unit Dimensions Diagram

A visual representation of the charger's physical dimensions.

Related product manuals