Need help?Do you have a question about the Quick SBC 2450 NRG HR and is the answer not in the manual?
General| Brand | Quick |
|---|---|
| Model | SBC 2450 NRG HR |
| Category | Battery Charger |
| Language | English |
Lists advantages and features of SBC NRG battery chargers.
Instructions for installation by qualified personnel, read manual first.
Specifies batteries and cables needed for different models based on capacity and voltage.
Guidelines for choosing a suitable, dry, airy, and safe location for installation.
Details about AC power cord and mains connection requirements.
Instructions for connecting batteries and important safety warnings.
How to connect a single battery or group to the MASTER output.
Instructions for connecting multiple chargers in parallel for current sharing.
Information on RJ45 CAN IN/OUT signals for monitoring and control.
Status signal on RJ45 CAN OUT pin 4 indicating operational status.
How to connect a single charger to a CAN network.
Example of CAN network connection for parallel chargers.
Explains the three charging phases: BULK, ABSORPTION, and FLOAT.
Details the alphanumeric LCD display and three control buttons.
How to navigate menus, change parameters, and confirm selections.
How to enter and navigate the system main menu for configuration.
Overview of the menu structure for programming and settings.
How to access secondary menus for specific settings.
How to select the battery type to optimize charging.
How to configure the CAN network group for devices.
How to set the priority level for chargers in a network group.
How to enable or disable the monitor mode for data transmission.
How to set the FLOAT threshold percentage for charge optimization.
How to set the maximum output current percentage.
How to enable or disable silent mode to reduce fan noise.
How to choose the language for the main and secondary menus.
Instructions on how to exit from main and secondary menus.
Lists problems requiring manual reset and their solutions.
Lists problems with automatic reset and their causes.
Lists warning messages related to battery voltage and temperature.
Lists status messages indicating operating phases or modes.
Guidance on routine checks for maintaining the battery charger.
Detailed technical specifications of the battery chargers.
To Next Page