Need help?Do you have a question about the Quick SBC 700 NRG+ FR and is the answer not in the manual?
General| Brand | Quick |
|---|---|
| Model | SBC 700 NRG+ FR |
| Category | Battery Charger |
| Language | English |
Guidance on installing the battery charger by qualified personnel, emphasizing safety and proper usage.
Details on model-specific battery voltage, capacity, and cable size requirements for installation.
Guidance on selecting a dry, airy spot, mounting orientation, and clearance requirements for the battery charger.
Information on AC power cord, voltage checks, required switches, and adherence to local electrical codes.
Details on RJ45 CAN IN and CAN OUT sockets and their pinout for equipment monitoring and control.
Explanation of the signal on pin 4 of the RJ45 CAN OUT socket for battery charger status.
Information on connecting the KTBRJ temperature sensor to the RJ11 socket for battery monitoring.
Procedure for selecting the correct battery type using the front panel selector when the charger is off.
Overview of the control panel, including LED indicators for status, error, and output current.
Description of the three-phase charging procedure: BULK, ABSORPTION, and FLOAT phases.
Table detailing LED flashes, messages, and descriptions for problems requiring manual reset.
Explanation of automatically resetting problems indicated by LED and LCD messages.
Guidance on routine checks of cables and electrical connections for optimal performance.
Specifications for maximum output current, absorption voltage, float voltage, and DC absorption.
Details on supply voltage, frequency, maximum absorption, power factor, and efficiency.
List of built-in protections including reverse polarity, overload, short circuit, and overheating.
Information on operating temperature, cooling, and humidity limits for the device.
Details on the case material and dimensions.
Information on CAN bus interface, charge compensation, and safety/EMC standards.
To Next Page