Quick TCD 2044 User Manual

21
TCD 2044
EN
INSTALLATION AND USE MANUAL - REV 002A
3.0 - OPERATION
3.3 - Enabling the control
To enable the control, press the enabling button and keep it pressed for at least 1 second.
After this interval the enabling LEDs will start flashing with greater frequency and the control will emit a short sound.
Release the enabling button, the enabling LEDs will remain steadily lit on and the control will be enabled.
In this condition the control will emit a short sound every 5 seconds.
3.4 - Single thruster operation
ATTENTION : once the direction joystick has been released, the boat will continue to move due to inertia.
When the thruster is activated the direction LED corresponding to the commanded movement (red to the left, green to
the right) will light on and the control will emit an intermittent sound.
BOW LEVER
TO THE RIGHT
STERN LEVER
TO THE RIGHT
BOW LEVER
TO THE LEFT
STERN LEVER
TO THE LEFT
BOW TCD 2044
STERN TCD 2044

Quick TCD 2044 Specifications

General

Brand	Quick
Model	TCD 2044
Category	Control Unit
Language	English