Quick XR Series - XR8 Technical Data; XR9 Technical Data

XRSeries
EN
QUICK XRSeries INSTALLATION AND USER’S MANUAL - REV000A
6
1 - Information about the product
1.2 - XR8 Technical Data
ELECTRIC MODELS XR8 AC 5500 X/Y XR8 AC 7500 X/Y
MOTOR POWER 5500 W AC 7500 W AC
Motor voltage
(1)
230/400 V 400/690 V
Maximum instantaneous pull 4500 kg (9921 lb) 6500 kg (14330 lb)
Maximum work load 2500 kg (5511 lb) 3500 kg (7716 lb)
Maximum recovery speed
(2)
14.5 m/min (47.5 ft/min) 14 m/min (46 ft/min)
Deck thickness
(3)
30 ÷ 60 mm (1” 3/16 ÷ 2” 5/16)
Weight 297 kg (654 lb) 303 kg (668 lb)
(1) Three-phase motor• (2) Measurements carried out with gypsy for 20.5 mm STUD-LINK chain. • (3) Studs for greater deck thickness can be supplied upon request.
HYDRAULIC MODEL XR8 HYDRO X/Y
Motor type Reversible gear type
Displacement 43 cc 2.62 in
3
Lifting capacity 3000 kg @ 170 bar 6613 lb @ 2465 psi
Recovery speed at work load
(1)
14 m/min 46 ft/min
Deck thickness
(2)
30 ÷ 60 mm 1” 3/16 ÷ 2” 23/64 inch
Weight 280.5 kg 618 lb
ADJUSTMENT VALUES (recommended by Quick)
Flow rate 70 l/min 18.5 USG/min
Maximum pressure 170 bar 2175 psi
(1) Measurements carried out with gypsy for 20.5 mm STUD-LINK chain. • (2) Studs for greater deck thickness can be supplied upon request.
1.3 - XR9 Technical Data
ELECTRIC MODELS XR9 AC 15000 X/Y
MOTOR POWER 15000 W AC
Motor voltage
(1)
400/690 V
Maximum instantaneous pull 17637 Kg (38882 lb)
Maximum work load 13227 Kg (29160 lb)
Maximum recovery speed
(2)
15 m/min (49 ft/min)
Deck thickness
(3)
30 ÷ 60 mm (1” 3/16 ÷ 2” 23/64)
Weight 580 kg (654 lb)
(1) Three-phase motor- (2) Measurements carried out with gypsy for 26 mm STUD-LINK chain. - (3) Studs for greater deck thickness can be supplied upon request.
HYDRAULIC MODEL XR9 HYDRO X/Y
Motor type Reversible gear type
Displacement 43 cc
2,62 in3
Lifting capacity 6000 kg @ 180 bar 6613 lb @ 456 bar
Recovery speed at work load
(1)
15 m/min 49 ft/min
Deck thickness
(2)
30 ÷ 60 mm 1” 3/16 ÷ 2” 23/64 inch
Weight 565 kg 1245 lb
ADJUSTMENT VALUES (recommended by Quick)
Flow rate 70 l/min 18.5 USG/min
Maximum pressure 170 bar 2175 psi
(1) Measurements carried out with gypsy for 26 mm STUD-LINK chain. - (2) Studs for greater deck thickness can be supplied upon request.