- 11 -
4.6 Setting the Monthly, Weekly, Bi-weekly pay period ending
day
Press Enter or Back to enter the program Code 02,
press + or – button to set the card type.
Press Enter again to register the setting value
4.6a Change the Monthly pay period end day
When the pay period end day is set to 00, the first row on
the 1~15 row card surface is automatically a blank row.
The set value is from 00 to 31.
4.7 Setting the Weekly pay period ending day
Press Enter or Back to enter the program code 02,
press + or – button to set the card type to 01
Press Enter again to register the setting value.
Press Clear button to select the required pay
period ending day and then Press Enter again to register
the setting value.
To Next Page
Loading...