QUICKCLOCKS QC500N - Opening the Case; Function Setting; Setting the Year

- 9 -
3. Opening the case
Using the key provided open the top cover and remove.
4. Function Setting
The programming mode is entered by unlocking and removing the top cover
from the time recorder with the program switch to the right hand side,
The LCD will shown b000 press Mode key to select the program required
b000,b001, b002, b003, b004
4.1 Setting the Year
Press Mode key to select the program b000
Press Enter again to register the setting value.
Press Enter or Back to enter the program Code 01,
(01 display on the left corner indicates the program Code)，
The digital display reads 2010 indicates year 2010，the year
“10” flashes on the right of the digital display, press the +
or – button to set the year. Press Enter to register the
setting.
4.2 Setting the Month and Date
Press Enter or Back to enter the program Code 02,