EasyManua.ls Logo

Quickie Xperience-2 - Product Specifications; Configuration and Dimensional Specifications; Performance and Power System Specs; Component Weights and Manufacturer Info

Quickie Xperience-2
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
XIV. PRODUCT SPECIFICATIONS
XIV
. PRODUCT SPECIFICATIONS
Configuration MID-WHEEL DRIVE – STANDARD OR HEAVY-DUTY (HD)
Suspension system
GC3 (Dual action: Interactive 6-wheel suspension and seat suspension)
Ground clearance
1
3.5” (90 mm) for 14” (355 mm) drive wheel and 2.875” (75 mm)
for 12.5” (320 mm) drive wheel
Base width
2
23.375” (595 mm) or 25.375” (645 mm)
Base length
2
35.125” (890 mm)
Turning radius
20” (510 mm)
Weight capacity
0-300 lb (0-136 kg) Standard / 301-450 lb (136-205 kg) Heavy-duty
Motor options (Maximum speed)
4-pole 5.4 mph (9 kmh) / 5.9 mph (9.5 kmh) / 6.5 mph (10.5 kmh)
Transit option (Unoccupied)
4-point tie-down brackets (Standard)
Transport option WC-19 (Occupied)
Optional
Battery type
Two 12 V, deep cycle Gel cell Group 22NF (50 Ah) or Group 24 (70 Ah) /
AGM Group 22NF (55 Ah) or Group 24 (75 Ah)
Battery charger
8 A, off board
Charging time
8 hours
Electronics
VR2 (90 A), R-Net (90 A or 120 A)
Assistive driving package
Available with Smart-Track technology
Specialty controls
Available (Switch-It, Stealth, ASL or MO-VIS)
Effective seat width range
Adjustable from 15” to 24” (380 mm to 610 mm) wide
Power seating options
Tilt, recline, elevate, elevating & articulating separate legrests, and elevating
& articulating center mount legrest (Personalization available)
Seat to floor height range
(With power tilt or seat lift)*
15.5” to 18.75” (395 mm to 475 mm)
Seat to floor height range
(With combo power tilt and seat lift)*
17.5” to 18.25” (445 mm to 465 mm)
Component weights
3
Base: Compact width: 128 lb (58 kg); Standard width: 133 lb (60 kg)
Batteries: Group 22NF: 2 x 36.6 lb (16.6 kg); Group 24: 2 x 54 lb (24.5 kg)
* Add 1.5” (40 mm) when using the HD elevate module.
1
Subject to variances depending on configuration and manufacturing tolerances.
2
Dimensions listed are for power base only.
Overall measurements will vary based on seating and accessory selections.
3
Battery weight may vary based on manufacturer.
For more information :
info@amylior.com
www.amylior.com
Phone: +1 450 424-0288
T/F Phone: 1 888 453-0311
Manufactured for
SUNRISE MEDICAL by:
3190 F.-X.-Tessier
Vaudreuil-Dorion QC
J7V 5V5, CANADA

Table of Contents