QuickJack™ Portable Car Jack 43 P/N 5900263 — Rev. B6 —September 2023
The following graphic shows the Release Cam not engaged on a locking position; do not leave
your Frames like this!
⚠ WARNING Before doing anything else (like starting work on the Vehicle or leaving the area),
visually confirm that both QuickJack Frames are on the same locking positions
and that all Lift Blocks are in contact with the factory-recommended Lifting Points
of the Vehicle.
You can work on your Vehicle once you have visually confirmed that both Frames are engaged on the
same locking position and that all Lift Blocks are in contact with the Vehicle at the factory-
recommended Lifting Points.
⚠ WARNING As an added safety precaution, you must always use auxiliary safety stands under
the Vehicle while elevated on both QuickJack Frames.
To Next Page
Loading...
