EasyManuals Logo
Home>Quicksilver>Boat>Activ 675 Open

Quicksilver Activ 675 Open User Manual

Quicksilver Activ 675 Open
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Quicksilver 675OP — Maintenance
38
Dry the window with a so cloth or chamois to prevent water spots. Polish with a separate cloth.
Don’t leave cleaners on for long periods; immediately wash the window. Finally, don’t apply cleaners
in direct sunlight or at elevated temperatures.
To minimize ne or hairline scratches apply a mild automove polish and remove with a so, clean
cloth. Do not use abrasive plasc polishes.
Tempered Glass Windshield
Use commercially available glass cleaners or a mixture of fresh water and vinegar to clean your glass
windows, windshield or portlights. Dry with a so terry cloth towel or chamois.
DO NOT use abrasives, harsh chemicals, or metal scrapers
on glass.
Acrylic Windscreens & Windows
The use of a polycarbonate protecve cleaner/restorer is recommended to keep your acrylic scratch
resistant, clean and minimize the deteriorang eects of sunlight.
To clean, rinse the windscreen/window thoroughly with clean water to remove any dust, dirt parcles,
salt water or environmental agents before applying cleaning products. Use your bare hand, with
plenty of water, to feel and dislodge any stuck-on dirt or foreign parcles. This should be done
frequently to avoid build up of salt water, dirt and other environmental contaminants.
Using a so non-abrasive cloth, wash windows inside and out with a mild soap and water soluon.
Rinse completely with cool water. Do not use detergents. Blot dry with a so cloth or chamois to
prevent water spots.
Never use a dry cloth or duster or glass cleaning soluons
on acrylic. DO NOT use solvents such as acetone, silicone
spray, benzine, carbon tetrachloride, re exnguisher uid,
dry cleaning uid, lacquer thinner, glass cleaning soluon or
harsh detergents on acrylic. These substances will aack the
surface of the acrylic.
Synthec Decking Material
The synthec deck material is stain resistant and most spills will clean up with warm soapy water (for
rapid stain removal, clean while stain is fresh). To clean, use an alkaline degreasing detergent used
with a s scrubbing brush, repeated as oen as necessary. If a slight mark remains aer a spill, sand
with 60 grit sandpaper, remember to follow the grain. This will remove any remaining marks. The deck
material may be power washed with or without detergent.
DO NOT use coat the synthec deck material with teak oil
or varnish. The material will not absorb uids.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quicksilver Activ 675 Open and is the answer not in the manual?

Quicksilver Activ 675 Open Specifications

General IconGeneral
BrandQuicksilver
ModelActiv 675 Open
CategoryBoat
LanguageEnglish

Related product manuals