3
1-888-QUIETCOOL
2. INSTALLATION
2.1 Installing QuietCool
NOTE: Be sure to plug in your fan before
attempting to install to ensure that the fan
is operational. If the fan is not operational,
call the company that you purchased the fan
from and request an exchange.
Installing the QuietCool system is very easy. Simply follow the
steps given below:
1. Determine from down below in which areas you
would like to install your QuietCool fans. Go up into
the attic to mark the exact location for each fan.
Take the cardboard cut-out template and a small
screwdriver with you. Make sure the template fits between the framing.
The rough opening size varies depending on which model
of QuietCool fan you are installing:
QuietCool Fan Model Rough Opening
QC CL-1500 14-1/4” x 14-1/4”
QC CL-2250 14-1/4” x 18-1/4”
QC CL-3100 14-1/4” x 22-1/4”
QC CL-4700 14-1/4” x 30-1/4”
QC CL-6400 14-1/4” x 36-1/4”
2. When you have chosen your exact spot, place the
template on the spot and mark it at each corner by
pushing the screwdriver through at each corner to
make a hole so that you can find it from below.
Scan this QR code for
more information about
installation
To Next Page
Loading...
Need help?
General