QUIETCOOLSYSTEMS.COM 7
3. OPERATION
3.1 Installing the App
Download the QuietCool Smart Control App onto your iOS
on Android device.
Scan the QR code above or visit our website at
QuietCoolSystems.com/smart-control-support/ and click the
link to download the app to your device.
3.2 Operating the App
HOME PAGE
This is the home page of the app and is presented as soon as
the app is opened.
If you have not yet paired your phone to your Hub, it will state
SETUP REQUIRED.
If you have paired your phone to your Hub, it will show a picture
of the fan as well as the name of your fan.
FAN SETUP PAGE
This page is used to setup the fan for the rst time.
You can quickly change the Fan Name, check if the speeds are
set properly, change the Fan Model, enter the Serial Number
and adjust the Climate Settings & Presets.
These settings can be accessed again after setup is done by
clicking the Settings button on the Fan Control Page.
FAN CONTROL PAGE
This page is accessed when you tap on your fan from the Home
Page.
On this page you can see the current conditions in your attic,
activate the different modes of the fan, and get to the Fan
Settings page.
Installing the app:
Download the QuietCool Smart Control App onto your iOS
or Android device by scanning the QR code or visiting
www.QuietCoolSystems.com/support
To Next Page
Loading...
Need help?
General
